Apple Watch is Stuck on the Apple Logo

Is your Apple Watch stuck on the Apple Logo? Check out our guide on Apple Watch is Stuck on the Apple Logo.

WatchOS, like iOS, has had its fair share of frustrating bugs. The problem that causes the Apple Watch to become stuck on the Apple logo is probably the most irritating bug that many users have encountered at some point.

The black screen of death leaves the watch utterly worthless, prompting you to seek a solution as soon as possible. If you find yourself in this scenario, look at the best ways to fix an Apple Watch is stuck on the Apple logo.

Press and hold both buttons for at least 10 seconds, or until you see the Apple logo, to try to force restart your watch. Make sure to give your Apple Watch some time to start up.

Apple Watch is Stuck on the Apple Logo

Before We Get Started

I was astonished at how long it took my Apple Watch to switch on when I initially got it. I believed that my Apple Watch is stuck on the Apple logo on a few occasions when all I needed to do was wait a bit longer.

If your Apple Watch has been frozen for several minutes on the Apple logo, it is most likely frozen. After the Apple logo displays on the display, don't be shocked if your Apple Watch takes a minute to switch on.

Why does Apple Watch get Stuck on Apple Logo

Here are some reasons why your Apple Watch is stuck on the Apple Logo this happens:

Apple Watch and iPhone's Watch App's Calendar or Time Zone Mismatch: If there is a mismatch between the Apple Watch's calendar or time zone and the iPhone's Watch app, that may be the root of the current problem because the Watch is unable to properly authenticate the communication with the Watch app.
Apple Watch boot loop caused by corrupt OS: The Apple Watch boot loop may occur if the OS of the device has become corrupt as a result of an OS upgrade that may have been applied incorrectly to the device.
Hardware Error: If a hardware element (such as a bad battery) has malfunctioned or become faulty, a user's Apple Watch may become stuck on the Apple logo.

Best Ways to Fix Apple Watch is Stuck on the Apple Logo

We've included steps in our guide that apply to any Apple Watch, whether you're using an old Apple Watch running watchOS 7 or a new Apple Watch running watchOS 8. We've also ordered the troubleshooting techniques in a logical order, starting with simple methods that won't lose any data and ending with complete factory resets of the Apple Watch. So check out how to fix when your Apple Watch is stuck on the Apple logo.

Place Your Apple Watch on the Magnetic Charger

To get rid of the stuck Apple logo, sometimes all you have to do is place your Apple Watch on the magnetic charger. So, to see if the smartwatch boots up normally, try this approach.

Allow a little more time for the software update/restore to complete.

If you were installing a software update, the watch is most likely not stuck on the Apple logo and is merely waiting for the update to complete before starting up. In this scenario, give the watch plenty of time to complete the update. If the Apple logo persists after a long time, you should attempt one of the actions below to resolve the issue.

Delete Software Update Files

If you've given your watch plenty of time to update but are still seeing the Apple logo with nothing else happening, you should try deleting the update files. You might not realize it, but the software update files on your Apple Watch can be deleted. Here's how to do it:

If it isn't open by default, open the 'Watch' app on your iPhone and go to the 'My Watch' section.
Go to General -> Storage.
Remove the Apple Watch software update file from your computer.
Delete the Update File after tapping Software Update.
Try reinstalling the software update on your Apple Watch now that you've erased the software update file. Hopefully, this will resolve the issue. It's time to try something else if it doesn't work.

Restart Your Apple Watch

"Did you switch it off and on again?" is a cliche for a reason: it works a lot of the time. When you have random malfunctions and troubles with your Apple watch, such as the watch being stuck on the Apple logo, the first thing you should do is a quick restart.

Press and hold the side button on your Apple Watch until the power off slider appears on the screen.
To turn off your Apple Watch, drag the power off slider.
To restart your watch, press the side button again after a few seconds.
You've solved the problem if your Apple Watch starts regularly. If the Apple Watch is still stuck on the Apple logo, it's time to try something else.

Completely Drain the Apple Watch Battery

The current problem could be caused by an Apple Watch that is stuck in the boot loop and fails to move past the Apple Logo screen. In this case, fully draining the Apple Watch's battery might close the loop and fix the issue.

Force the Apple Watch to restart, then set it aside until its battery runs out (it may take a day or two).
When the battery is completely depleted, put the Watch on charging and wait until it is fully charged before checking to see if the device is functioning normally.

Use the Find My App service to Apple Watch Stuck on Apple Logo

Your iPhone's Find My app may be used for more than just finding your loved ones and connected devices. It may also assist you in resolving the Apple watch stuck on the Apple logo issue. True, this is unusual, but many users have stated that it has helped them overcome the same problem, so why not give it a try? What you should do is as follows.

On your iPhone, go to the Devices tab in the Find My app.
To see all of the linked devices, you may need to pull up the Devices handle. Then, on your Apple Watch, press the Play Sound button.
Play music on your Apple Watch.

When your Apple Watch receives an instruction to play a sound, it frequently 'unfreezes' and resumes normal operation. Don't worry if this strategy doesn't work for you; there are plenty of alternative options available. Continue reading.

Turn off VoiceOver

This one is worth a shot before we go on to the ultimate solution.

Make sure the Apple Watch is connected to the iPhone via Bluetooth and Wi-Fi.
On the iPhone, open the Watch app and select Accessibility from the My Watch area.
Make sure the VoiceOver and Screen Curtain toggles are both switched off by tapping VoiceOver.
Return to the previous screen and tap Accessibility Shortcut from the bottom. Make sure that none of the options has a checkbox next to them.

Hard Reset Your Watch

Now is the time for the ultimate solution. When it comes to fixing various watchOS difficulties, a hard reset (also known as a force restart) is highly successful.

For a few seconds, hold down the Digital Crown and the Side button at the same time until your Apple Watch starts up normally.

You don't need to do anything else if your watch has now resumed normal operation. Just take a deep breath and keep going, knowing that you've saved yourself a lot of trouble.

Update the WatchOS Software

Whether you've tried everything and your Apple Watch is still stuck on the Apple logo, it's time to see if there are any outstanding software upgrades. Apple distributes watchOS updates regularly, with speed improvements, bug fixes, and security improvements.

It's best to install updates as soon as possible, but if you haven't already, the update may be able to help you fix any bugs that are causing your Apple Watch to get stuck in a startup loop.
Make sure the My Watch tab in the lower-left corner of the Watch app on your paired iPhone is selected. Now select General.
After that, go to Software Update and download and install the most recent version of the software.

Erase Your Apple Watch

Have you tried everything else on the list but haven't had any luck? It's possible that your Apple Watch has to be factory reset. This is an extreme remedy, but it usually solves practically any problem you may have. Furthermore, when you unpair Apple Watch, watchOS automatically backs up your data, so you don't have to worry about backing up your data.

Open the Watch app on your attached iPhone and select General.
Choose Reset from the drop-down menu. Then, on the Erase Apple Watch Content and Settings screen, tap Erase Apple Watch Content and Settings. To confirm, make sure you tap Erase All Content and Settings.
After you've wiped your Apple Watch, you'll have to set it up all over again.

Hopefully, this will resolve the problem you were having.

Contact Apple Support

If your Apple Watch is still stuck on the Apple logo after a factory reset, contact Apple for assistance. Contact Apple Support as soon as possible, and they should be able to assist you with troubleshooting and bringing your watch in for repair.

Contact Official Apple Support here

https://twitter.com/applesupport

Apple Watch is Stuck on the Apple Logo - Conclusion

That concludes the methods for resolving an Apple Watch is stuck on the Apple logo. Hopefully, following the solutions we provided, you were able to get your smartwatch to work flawlessly. If they did, please tell us which approach worked for you, and if they didn't, please tell us what Apple Support said the problem was and how they fixed it.

Also Read: